If you need to reset your Aruba AP's to factory defualt it's really simple.
- Connect the serial console breakout adapter cable to the AP Ethernet port and your PC/Laptop
- Power on the AP and get into apboot mode. You'll see the option to go into AP boot mode when the AP is booting.
- From the apboot prompt, enter the following commands
apboot> purge
apboot> save
apboot> reset
That's it! Your Aruba AP's will now be set back to factory default.
Disclaimer: Enterprise Networks Solutions assumes no responsibility, and shall not be liable for, any damages to your computer equipment/software or other property on account of your access to, use of, or browsing of this site.
3bcc5c92-0de6-448d-8188-171eb54daf6e|0|.0